What can be done with functional masterbatches?

Cooling masterbatch: mainly used for PP can lower the temperature by 30-50 degrees.

Brightening masterbatch: Brightening masterbatch is also called bright masterbatch, the purpose is to improve the brightness of the product, the main brightener is ethylene bis stearamide, the amount of color masterbatch is 20%-30%, in the product is 0.2%-0.3%, too much will affect the printing effect of the product.

When the masterbatch is strengthened, sometimes the material is easy to accumulate in the lower mouth. It is mainly caused by the entrained air of talc powder. It should be heated and stirred during production to melt the wax, wet lubricating stone powder or white mineral oil.

Moisture-absorbing defoaming masterbatch: The moisture-absorbing defoaming masterbatch can mainly remove the moisture contained in the plastic and the unknown low-molecular volatiles, so that the plastic product has no water and no bubbles, so that the drying process can be reduced while ensuring the quality of the product.

Flame Retardant Masterbatch: Flame retardant masterbatch is mainly used in flame retardant modification.

Foamed masterbatch: Foamed masterbatch is commonly used in PE, PP, EVA, etc.

Through the above introduction, we have a deeper understanding of the role of several common functional masterbatches?.